You can use vinegar-bendy paste made with baking soda to clean your jewelry that is extra-dirty. To clean jewelry with baking soda and vinegar, you will need baking soda, vinegar, water, two bowls, a soft-bristled toothbrush, and a soft cloth. You are going to need serious elbow grease to make sure that your jewelry is as clean as if you were washing it with soap and water or with a specialized stainless steel cleaner. Soak dingy stainless steel jewelry in a single bowl of hot water with the soap and water solution for several minutes.
For this method, you will want to start by filling two small bowls with warm water. Fill both of these bowls with hot water, then add about three drops of dish soap into one of the containers.
Soak your stainless steel jewelry in a bowl that contains the mixture of the mild soap and the warm water, and leave it there for several minutes. Fully immerse stainless jewelry into a mixture of vinegar and water, allowing it to soak for about 15 minutes.
Rinse off the metal into the second bowl, and finish the cleaning process by polishing the stainless steel jewelry using the polishing cloth. Use a dry cloth to remove any water, then polish the jewelry using a jewelers polish or a polishing cloth. You can then rub your jewelry with a soft towel or napkin to get rid of any access water. All you have to do is to thoroughly clean your jewelry off with the cloth, and you are good to go.
Regularly cleaning and polishing your jewelry will ensure that you will be able to enjoy your pieces for years. You can prevent dirt and oils from clogging up your jewelry, and regain its shine with buffing. If your jewelry has lost its shine, it is time for a deep clean.